References

You can filter the reference list by application and search using author names, keywords or year of publication. The search will accept partial terms.

ARNOLD, M. , (1981)
An Empirical Evaluation of Pressuremeter Test Data
Civil Engineering Department, University of Adelaide, South Australia.
Cambridge Insitu Reference ID: 24
BAGUELIN, F. , JEZEQUEL, J.F. , SHIELDS, D.H. , (1978)
The Pressuremeter and Foundation Engineering
Transtech Publications, Clausthal, Germany ISBN 0-87849-019-1.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 25
BELLOTTI, R. , GHIONNA, V. , JAMIOLKOWSKI, M. , ROBERTSON, P. , PETERSON, R. , (1989)
Interpretation of moduli from self-boring pressuremeter tests in sand
Géotechnique Vol.XXXIX, no.2, pp. 269-292.
Categories: Pressuremeters Guide, Self Boring
Cambridge Insitu Reference ID: 26
BENOIT, J. , (1983)
Analysis of Self-Boring Pressuremeter Tests in Soft Clay
A dissertation submitted to the Department of Civil Engineering and the Committee on Graduate Studies of Stanford University in Partial Fulfilment of the Requirements of the Degree of Doctor of Philosophy.
Categories: Self Boring
Cambridge Insitu Reference ID: 27
BENOIT, J. , CLOUGH, G.W. , (1985)
Principal Stresses Derived from the Self-Boring Pressuremeter Tests in Soft Clays
The Pressuremeter and its Marine Applications, 2nd International Symposium.
Categories: Self Boring
Cambridge Insitu Reference ID: 28
BOLTON M.D. , WHITTLE R.W. , (1999)
A non-linear elastic/perfectly plastic analysis for plane strain undrained expansion tests
Géotechnique 49, No. 1, pp 133-141.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 29
BRUZZI, D. , GHIONNA, V. , JAMIOLKOWSKI, M. , LANCELLOTTA, R. , MANFREDINI, G. , (1986)
Self-Boring Pressuremeter in Po River Sand
2nd International Symposium on The Pressuremeter and its Marine Applications.
Categories: Self Boring
Cambridge Insitu Reference ID: 30
CAMBRIDGE UNIVERSITY ENGINEERING DEPARTMENT , (1990)
Private correspondence
data for soil index properties at High Cross
Cambridge Insitu Reference ID: 136
CARTER, J. P. , BOOKER, J. R. , YEUNG, S. K. , (1986)
Cavity expansion in cohesive frictional soils
Géotechnique 36, No. 3, pp 349-358
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 106
CHANDLER, R.J. , LEROUEIL, S. , TRENTER, N.A. , (1990)
Measurements of the permeability of London Clay using a self boring permeameter
Géotechnique 40, No. 1, pp 113-124.
Categories: Pressuremeters Guide, Self Boring
Cambridge Insitu Reference ID: 31
CLARKE, B.G. , CARTER, J.P. , WROTH, C.P. , (1979)
In Situ Determination of Consolidation Characteristics of Saturated Clays
Design Parameters in Geotechnical Engineering, VII ECSMFE, Brighton, Vol. 2, pp 207-211
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 32
CLARKE, B.G. , (1981)
In Situ Testing of Clay Using Cambridge Self-Boring Pressuremeter
PhD Thesis, Cambridge University.
Categories: Self Boring
Cambridge Insitu Reference ID: 33
CLARKE, B.G. , WROTH, C.P. , (1984)
Analysis of Dunton Green retaining wall based on results of pressuremeter tests
Géotechnique 34, No. 4, pp 549-561.
Cambridge Insitu Reference ID: 34
CLOUGH, G.W. , DENBY, G.M. , (1980)
Self-boring Pressuremeter study of the San Francisco Bay Mud
J. Geotech Eng. Divn. ASCE V l06, No. GTl pp 45-63
Categories: Self Boring
Cambridge Insitu Reference ID: 35
DALTON, J.C.P. , HAWKINS, P.G. , (1982)
Fields of Stress, some measurements of the in-situ stress in a meadow in the Cambridgeshire countryside
Ground Engineering Vol. 15, No. 4 pp 12 -23.
Cambridge Insitu Reference ID: 36
DENBY, G.M. , CLOUGH, G.W. , (1980)
Self-boring Pressuremeter Tests in Clay
J. Geotech Eng. Divn. ASCE V 106 No. GT12 pp 1369-1387.
Categories: Self Boring
Cambridge Insitu Reference ID: 37
DENBY, G.M. , (1978)
Self Boring Pressuremeter Study of the San Francisco Bay Mud
PhD Thesis, Department of Civil Engineering, Stanford University Technical Report, CE232.
Categories: Self Boring
Cambridge Insitu Reference ID: 38
DENBY, G.M. , COSTA, C.A. , CLOUGH, G.W. , DAVIDSON, R.R. , (1981)
Laboratory and Pressuremeter Tests in Stiff Clay
Proceedings of the Tenth International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Sweden.
Cambridge Insitu Reference ID: 39
DENBY, G.M. , HUGHES, J.M.O. , (1982)
Horizontal stress interpretation of pressuremeter tests
Proc. ASCE Conf. on Updating Subsurface Sampling of Soils and Rocks and their In-Situ Testing, Santa Barbara, California.
Cambridge Insitu Reference ID: 40
DIXON, N. , WHITTLE R.W. , JONES, D.R.V. , NG'AMBI, S. , (2006)
Pressuremeter Tests in Municipal Solid Waste: Measurement of Shear Stiffness
Géotechnique, 56(3), pp 211-222
Cambridge Insitu Reference ID: 101
ERVIN, M.C. , BURMAN, B.C. , HUGHES, J.M.O. , (1980)
The use of a high capacity pressuremeter for design of foundations in medium strength rock
International Conference on Structural Foundations on Rock, Sydney.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 41
FAHEY, M. , (1980)
A Study of the Pressuremeter Test in Dense Sand
PhD Thesis University of Cambridge.
Cambridge Insitu Reference ID: 42
FAHEY, M. , JEWELL, R.J. , (1990)
Effect of Pressuremeter Compliance on Measurement of Shear Modulus
Paper submitted to The Third International Symposium on Pressuremeters, Oxford University 2 - 6 April 1990.
Cambridge Insitu Reference ID: 43
FAHEY, M. , RANDOLPH, M.F. , (1984)
Effect of disturbance on parameters derived from Self- boring Pressuremeter tests in sand
Géotechnique 34, No. 1, pp 81-97.
Categories: Self Boring
Cambridge Insitu Reference ID: 44
GHIONNA, V. , JAMIOLKOWSKI, M. , LACASSE, S. , LADD, C.C. , LANCELLOTTA, R. , LUNNE, T. , (1983)
Evaluation of Self-Boring Pressuremeter
Symposium International Vol. 2 Paris.
Categories: Self Boring
Cambridge Insitu Reference ID: 45
GHIONNA, V. , JAMIOLKOWSKI, M. , LANCELLOTTA, R. , (1982)
Characteristics of Saturated Clays as Obtained from SBP Tests
Proc. Int. Symp. Pressuremeter and its Marine Appls., Paris, pp 165-186.
Categories: Self Boring
Cambridge Insitu Reference ID: 46
GHIONNA, V. , JAMIOLKOWSKI, M. , LANCELLOTTA, R. , TORDELLA, M.L. , LADD, C.C. , (1981)
Performance of Self-Boring Pressuremeter tests in cohesive deposits
Dept of Civil Engineering, MIT, Report FHWA/RD- 81/173.
Categories: Self Boring
Cambridge Insitu Reference ID: 47
GHIONNA, V. , JAMIOLKOWSKI, M. , LANCELLOTTA, R. , MANASSERO, M. , (1989)
Limit Pressure of Pressuremeter Tests
Proc. of 12th ICSMFE, Rio De Janeiro.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 48
GIBSON, R.E. , ANDERSON, W.F. , (1961)
In situ measurement of soil properties with the pressuremeter
Civil Engineering and Public Works Review, Vol. 56, No. 658 May pp 615-618.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 49
GUNN M.J. , (1992)
The prediction of surface settlement profiles due to tunnelling
Proc. Wroth Memorial Symposium, July 1992. Thomas Telford, London.
Cambridge Insitu Reference ID: 50
HABERFIELD, C.M. , JOHNSTON, L.W. , (1990)
The interpretation of pressuremeter tests in weak rock – theoretical analysis
Proc. 3rd Int.Symp.Pressuremeter, Oxford, pp. 169-178
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 107
HAWKINS, P.G. , MAIR, R.J. , MATHIESON, W.G. , MUIR WOOD, D. , (1990)
Pressuremeter measurement of total horizontal stress in stiff clay
Proc. ISP.3 Oxford.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 51
HOULSBY, G. , WITHERS, N.J. , (1988)
Analysis of the Cone Pressuremeter Test in Clay
Géotechnique, Vol 38, No. 4, pp 575-587.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 109
HOULSBY, G. , CLARKE, B. , WROTH, C.P. , (1986)
Analysis of the unloading of a pressuremeter in sand
Proc. of the 2nd International Symposium on The Pressuremeter and its Marine Applications pp 245-262.
Cambridge Insitu Reference ID: 52
HOULSBY, G.T. , SCHNAID, F. , (1994)
Interpretation of shear moduli from cone pressuremeter tests in sand
Géotechnique 44, no.1, pp 147-164.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 108
HOULSBY, G.T. , CARTER, J.P. , (1993)
The effects of pressuremeter geometry on the results of tests in clay.
Géotechnique 43, No.4, pp 567-576.
Cambridge Insitu Reference ID: 137
HOULSBY, G.T. , CARTER, J.P. , (1995)
Discussion, The effects of pressuremeter geometry on the results of tests in clay.
Géotechnique 45, No.4, pp 741-748.
Cambridge Insitu Reference ID: 138
HUGHES, J.M.O. , (1973)
An instrument for in situ measurement in soft clays
PhD Thesis, University of Cambridge.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 53
HUGHES, J.M.O. , ERVIN, M.C. , (1980)
Development of a High Pressure Pressuremeter for determining the engineering properties of soft to medium strength rocks
Proc. 3rd Aus.-NZ Conf. Geomechanics, Brisbane, pp.292-296.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 54
HUGHES, J.M.O. , WROTH, C.P. , PENDER, M.J. , (1975)
A comparison of the results of special pressuremeter tests with conventional tests on a deposit of soft clay at Canvey Island
Internal Report No. CUED/C - SOILS TR 20, Cambridge University Engineering Department.
Cambridge Insitu Reference ID: 55
HUGHES, J.M.O. , WROTH, C.P. , WINDLE, D. , (1977)
Pressuremeter tests in sands
Géotechnique 4, pp 455-477.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 56
HVORSLEV , (1949)
quoted in LAMBE, T.W. and WHITMAN, R.V. (1969)
"Soil Mechanics" publ. John Wiley & Sons, Inc, New York. LCCC Number: 68-30915
Cambridge Insitu Reference ID: 135
JARDINE, R.J. , (1991)
Discussing ‘Strain-dependent moduli and pressuremeter tests’
Géotechnique 41, No. 4., pp 621-624.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 57
JARDINE, R.J. , (1992)
Nonlinear stiffness parameters from undrained pressuremeter tests
Can. Geotech. 29, pp 436-447.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 58
JARDINE, R.J. , POTTS, D.M. , FOURIE, A.B. , BURLAND, J.B. , (1986)
Studies of the influence of non-linear stress strain characteristics in soil structure interaction
Géotechnique 36, No. 3, pp 377-396.
Cambridge Insitu Reference ID: 59
JEFFERIES, M.G. , (1988)
Determination of horizontal geostatic stress in clay with self-bored pressuremeter
Can. Geotech. 25 (3), pp 559-573.
Categories: Pressuremeters Guide, Self Boring
Cambridge Insitu Reference ID: 60
JEWELL, R.J. , FAHEY, M. , WROTH, C.P. , (1980)
Laboratory Studies of the Pressuremeter Test in Sand
Géotechnique 30, No. 4 pp 507-531.
Cambridge Insitu Reference ID: 61
LACASSE, S. , LUNNE, T. , (1982)
In Situ Horizontal Stress from Pressuremeter Tests
Proc. of the Symp. on the Pressuremeter and its Marine Applications, Paris.
Cambridge Insitu Reference ID: 62
LADANYI, B. , (1973)
Expansion of a Cavity in a Saturated Clay Medium
Journal of the Soil Mechanics and Foundation Engineering Division, ASCE, Vol. 89, No. SM4, Proc. Paper 3577, July 1973, pp 127-161.
Cambridge Insitu Reference ID: 63
LAMBE, T.W. , WHITMAN, R.V. , (1969)
Soil Mechanics
publ. John Wiley & Sons, Inc, New York. LCCC Number: 68-30915.
Cambridge Insitu Reference ID: 64
LEE, K.M. , ROWE, R.K. , (1989)
Deformations caused by surface loading and tunnelling: the role of elastic anisotropy
Géotechnique 39, No. 1, pp 125-140.
Cambridge Insitu Reference ID: 65
LEROUEIL, S. , LERAT, P. , HIGHT, D.W. , POWELL, J.J.M. , (1992)
Hydraulic conductivity of a recent estuarine silty clay at Bothkennar
Géotechnique 42, No. 2, pp 275-288.
Cambridge Insitu Reference ID: 66
MAIR, R.J. , WOOD, D.M. , (1987)
Pressuremeter Testing. Methods and Interpretation
Construction Industry Research and Information Association Project 335. Publ. Butterworths, London. ISBN 0-408-02434-8.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 68
MANASSERO, M. , (1989)
Stress-Strain Relationships from Drained Self Boring Pressuremeter Tests in Sand
Géotechnique 39, No.2. pp 293-307.
Categories: Pressuremeters Guide, Self Boring
Cambridge Insitu Reference ID: 69
MARSLAND, A. , RANDOLPH, M.F. , (1977)
Comparison of the Results from Pressuremeter Tests and Large Insitu Plate Tests in London Clay
Géotechnique 27 No. 2 pp 217-243.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 67
MUIR WOOD, D. , (1990)
Strain dependent soil moduli and pressuremeter tests
Géotechnique, 40, pp 509-512.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 70
NEWMAN, R.L. , CHAPMAN, T.J.P. , SIMPSON, B. , (1991)
Evaluation of pile behaviour from pressuremeter tests
Proc. Xth European Conference on Soil Mechanics and Foundation Engineering, Florence, May 1991.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 71
PALMER, A.C. , (1972)
Undrained plane-strain expansion of a cylindrical cavity in clay: a simple interpretation of the pressuremeter test
Géotechnique 22 No. 3 pp 451-457.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 72
RANDOLPH, M.F. , WROTH, C.P. , (1978)
An analytical solution for the consolidation around a driven pile
Int. J. Numer. Anal. Methods in Geomech.
Cambridge Insitu Reference ID: 73
RATNAM, S. , SOGA, K. , MAIR, R.J. , BIDWELL, T. , (2000)
A Novel in situ permeability measurement technique using the Cambridge self boring pressuremeter
Proc. GeoEng 2000, A conference on geotechnical and geological engineering, Melbourne, Australia (submitted)
Categories: Self Boring
Cambridge Insitu Reference ID: 845
RATNAM, S. , SOGA, K. , WHITTLE, R.W. , (2001)
Revisiting Hvorslev's intake factors using the finite element method
Geotechnique 51, No. 7, pp 641-646
Categories: Self Boring
Cambridge Insitu Reference ID: 846
RATNAM, S. , SOGA, K. , WHITTLE, R.W. , (2001)
Self-boring pressuremeter permeability measurements in Bothkennar clay
Geotechnique 52, No. 1, pp 55 -60
Categories: Self Boring
Cambridge Insitu Reference ID: 847
RATNAM, S. , SOGA, K. , WHITTLE, R.W. , (2005)
A field permeability measurement technique using a conventional self-boring pressuremeter
Geotechnique, 55. pp. 527-537. ISSN 0016-8505
Categories: Pressuremeters Guide, Self Boring
Cambridge Insitu Reference ID: 105
ROBERTSON, P.K. , HUGHES, J.M.O. , (1985)
Determination of Properties of Sand from Self-Boring Pressuremeter Tests
The Pressuremeter and Its Marine Applications, Second International Symposium.
Categories: Self Boring
Cambridge Insitu Reference ID: 74
ROWE, P.W. , (1962)
The Stress Dilatancy Relation for Static Equilibrium of an Assembly of Particles in Contact
Proceedings of the Royal Society. Vol. 269, Series A, pp 500-527.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 75
SHUTTLE, D.A. , JEFFERIES, M.G. , (1995)
A practical geometry correction for interpreting pressuremeter tests in clay.
Géotechnique 45, No.3, pp 549-554.
Cambridge Insitu Reference ID: 139
SIMPSON, B. , ATKINSON, J.H. , JOVICIC,V. , (1996)
The influence of anisotropy on calculations of ground settlements above tunnels
Proc. Int. Symp. Geotechnical aspects of Underground Construction in Soft Ground, City University, London, April.
Cambridge Insitu Reference ID: 76
TAVENAS, F. , DIENE, M. , LEROUEIL, S. , (1990)
Analysis of the insitu constant head permeability test
Can.Geotech.J.,27, 305-314.
Cambridge Insitu Reference ID: 77
TEDD, P. , HOLTON, I.R. , BTCHER, A.P. , WALLACE, S. , DALY, P.J. , (1997)
Investigation of the performance of cement-bentonite cut-off walls in aggressive ground at a disused gasworks site
Proc. Int.Containment Technology Conference and Exhibition, Feb 9-12, 1997, St.Petersburg, Florida USA. Vol.5, No.3, pp 217-223
Categories: Self Boring
Cambridge Insitu Reference ID: 848
TEH, C. I. , HOULSBY, G. T. , (1991)
An analytical study of the cone penetration test in clay
Géotechnique 41, No.2, pp. 269-292
Cambridge Insitu Reference ID: 987
WHITTLE, R.W. , DALTON, J.C.P. , (1990)
Discussing 'Experience with the self boring rock pressuremeter'
Ground Engineering, Jan/Feb, pp 30-32.
Categories: Pressuremeters Guide, Self Boring
Cambridge Insitu Reference ID: 78
WHITTLE, R.W. , DALTON, J.C.P. , HAWKINS P.G. , (1992)
Shear Modulus and Strain Excursion in the Pressuremeter Test
Proc. Wroth Memorial Symposium, Oxford, July 1992.
Cambridge Insitu Reference ID: 79
WHITTLE, R.W. , HAWKINS, P.G. , DALTON J.C.P. , (1995)
The view from the other side - lift-off stress and the six arm self boring pressuremeter
The Pressuremeter and its New Avenues, Proc.4th International Symposium 17-19 May 1995.
Categories: Self Boring
Cambridge Insitu Reference ID: 80
WHITTLE, R.W. , (1993)
Discussing 'The assessment of in situ stress and stiffness at seven overconsolidated clay and weak rock sites'
Ground Engineering, Sept 1993, pp 19-20.
Cambridge Insitu Reference ID: 81
WHITTLE, R.W. , (1996)
Recent developments in the cone pressuremeter
Proc. Int. Conf. Advances in site investigation practice, Thomas Telford Publishing, London, pp 533-546. ISBN 0 7277 2513 0.
Cambridge Insitu Reference ID: 82
WHITTLE, R.W. , (1999)
Using non-linear elasticity to obtain the engineering properties of clay - a new solution for the self boring pressuremeter
Ground Engineering, Vol.32, No.5, pp 30-34.
Categories: Pressuremeters Guide, Self Boring
Cambridge Insitu Reference ID: 83
WINDLE, D. , (1976)
In situ testing of soils with a Self-boring Pressuremeter
PhD Thesis University of Cambridge.
Categories: Self Boring
Cambridge Insitu Reference ID: 85
WINDLE, D. , WROTH, C.P. , (1977)
The Use of a Self-boring Pressuremeter to determine the Undrained Properties of Clays
Ground Engineering, September.
Categories: Pressuremeters Guide, Self Boring, Undrained
Cambridge Insitu Reference ID: 86
WITHERS, N.J. , HOWIE, J. , HUGHES, J.M.O. , ROBERTSON, P.K. , (1989)
Performance and Analysis of Cone Pressuremeter Tests in Sands
Géotechnique 39, No. 3, pp 433-454.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 84
WOOD, D.M. , WROTH, C.P. , (1977)
Some laboratory experiments related to the results of pressuremeter tests
Internal Report No. CUED/C Soils TR 32, Cambridge University Engineering Department, also published in Géotechnique 27, pp 181-201.
Cambridge Insitu Reference ID: 87
WROTH C.P. , RANDOLPH M.F. , HOULSBY G.T. , FAHEY M. , (1979)
A review of the engineering properties of soils with particular reference to the shear modulus
Cambridge University Engineering Department, Soils TR75.
Cambridge Insitu Reference ID: 88
WROTH C.P. , (1982)
British Experience with the Self Boring Pressuremeter in Proceedings of the Symposium on the Pressuremeter and its Marine Applications
Paris April 1982. Editions Techniq. 75737 Paris Cedex 15.
Categories: Self Boring
Cambridge Insitu Reference ID: 89
WROTH C.P. , (1984)
The Interpretation of In Situ Soil Tests
Twenty Fourth Rankine Lecture, Géotechnique 34, No. 4, pp 449-489.
Categories: Pressuremeters Guide
Cambridge Insitu Reference ID: 90
ZNIDARCIC, D. , PICCOLI, S. , (1995)
Field measurements of hydraulic conductivity
Proc. 4th Int.Symp. Field measurements in Geomechanics, Bergamo, Italy. April 10-12 1995, pp 489-494.
Cambridge Insitu Reference ID: 91